Aluminum veneer installation method

1. Install the corners at the same level.
2. There are different frames according to different requirements, such as: L50*50*5mm angle steel fixing, embedded aluminum hanger fixing, etc. There are different fixing methods according to different products.
3. Put the hanging parts pre-installed on the gusset keel, together with the gusset keel, close to the light steel keel in a vertical direction under the light steel keel. The spacing of the gusset keel is determined according to the size of the board. After all the installations are completed, they must be adjusted to the level.
4. Buckle the gussets on the keel in sequence. After each buckle, press down the inverted lock piece. Use the connector to connect the keel.
5. Gloves must be worn when installing the board surface. If fingerprints or stains are left accidentally, they can be cleaned with detergent and wiped dry.